Model #FES TPI brand Portable Electric Salamander Heater (9 kW to 60 kW, 30717 to 204780 Max BTUs, 208, 240, 480, 575 & 600V Options) - 13 Models to Choose From

• Heater housing has a safety yellow textured powder coated finish and includes protective black finish guards on both air intake and output openings.
• Long-life finned tubular heating elements, high-limit thermal cutout switch with automatic reset.
  
• Control know allows for fan only operation and thermostat adjustments from 40º to 100ºF
• Fan-forced electric heaters generate 800 to as much as 2500 CFM's
• 9-30kW units features a built-in rotating stop allowing housing adjustments for up to 90º from center axis.
• Includes access panel for direct wiring connections.
• 10" industrial heavy-duty wheels and handle for easy portability over all surface types.
• 45-60kW units include a factory 10' long pre-wired cable and straight blade range plug optional cord for all other models.
• ETL Listed for USA & Canada.

•  Provides temporary climate control for interior jobsite heating.
• Drywall & building contractors - assist in drying applications.
• Best interior electric heating product over propane or fossil fuel units.
• Safe operating unit - operate unit overnight to elevate temperature.
• Can be operated unattended without any time wasted for refueling.
• Clean, quite & safe electric fan-forced heater.

What to know when selecting the correct FES Heater:

1. Determine your operating voltage and electrical phase for your job site.

2. Calculate the square footage of the area to heat (Length x Width)

3. Measure the maximum ceiling height for your area.

4. Know you must have insulation and at least 10-watts.sq.ft. to effectively heat your area. The higher your ceiling the higher watts/sq.ft. needed.

5. Temperature rise is calculated by taking the room temperature then adding the temp rise (see chart);

room temp + temp rise = discharge temp

Printable Manual (124 kb)   

Printable Instructions (1,452 kb)